Complete Systems

On this page we list some of the commonest combinations of parts that form complete systems.

SWIS10-11 is a Steering Wheel Display and the Display Controller that allows the steering wheel display to be driven from an engine management unit over a serial RS232 link or through a CAN link:  As an option Lap Timing may be added.  Click for Details.

IR detector
display controller
250-300
beacon

SWIS20 comprises a Steering Wheel Display and an FD20 Data LoggerThis system includes Lap Timing and a Wheel Speed Sensor.  It does not include temperature or pressure sensors that must be ordered separately.  The Performance Monitor is available as an option.  Click for Details

FD20 Box Open
IR detector
250-300
beacon

RCA400 consists of the same components as the SWIS20 system except the Steering Wheel Display is exchanged for the RCA60 LCD Display.  This system is very suitable for Historic Racing Cars where the steering wheel display would look out of place.  The system includes lap timing and a wheel speed sensor but, again temperature and pressure sensors need to be ordered separately.  The Performance Monitor is available as an option.  Click for details

IR detector
RCA60 -2009a FD20 Box Open
beacon

RCA800 is similar to the SWIS20 system except the RCA80 Display replaces the full Steering Wheel Display.  Again Lap Timing and a Wheel Speed sensor is included but temperature and pressure sensors need to be ordered separately.  The Performance Monitor is available as an option.

IR detector
FD20 Box Open
Display-1
beacon